Bondloc B270 Studlock Permanent High Strength Threadlocker - 10ml or 50ml

Description

Bondloc B270 Studlock Permanent High Strength Threadlocker - 10ml or 50ml
Model: B270
Sizes: 10ml & 50ml
By the leading brand Bondloc
Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases.
It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses.
Specifications:
Resin: Dimethacrylate
Colour: Green
Fixture Speed No Activator: 10 min.
Fixture Speed With Activator: 5 min.
Viscosity: 500 cps
Gap fill: 0.25mm
Flash Point: >100°C
Shelf Life: minimum 12 month
Specific Gravity: 1.06.
Max Operating Temperature: -55°C to +180°C
Cured Performance:
Full Cure Time: 12 hours.
Cure Time with good % of final strength: 2 hours
Typical Breakaway Strength din: 40 Nm (25/55)
Typical Prevailing Strength din
: 55 Nm (45/70)
Typical Breakaway ISO 10964: 26 Nm (16/36)
Typical Prevailing ISO 10964: 36 Nm (22/50)
For further enquiries please contact us.
Our details can be found in the
‘Business Seller Information’
below.
Visit our Ebay shop for further availability on a range of similar products.
Discounted rates are available on items bought in larger quantities.
Thank you for your interest in the products & services we offer.
Model: B270 Sizes: 10ml & 50ml By the leading brand Bondloc Specifications: Resin: Dimethacrylate Colour: Green Fixture Speed No Activator: 10 min. Fixture Speed With Activator: 5 min. Viscosity: 500 cps Gap fill: 0.25mm Flash Point: >100°C Shelf Life: minimum 12 month Specific Gravity: 1.06. Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours. Cure Time with good % of final strength: 2 hours Typical Breakaway Strength din: 40 Nm (25/55) Typical Prevailing Strength din : 55 Nm (45/70) Typical Breakaway ISO 10964: 26 Nm (16/36) Typical Prevailing ISO 10964: 36 Nm (22/50) For further enquiries please contact us.  Our details can be found in the ‘Business Seller Information’ below. Discounted rates are available on items bought in larger quantities. Thank
Model: B270 Sizes: 10ml & 50ml By the leading brand Bondloc Specifications: Resin: Dimethacrylate Colour: Green Fixture Speed No Activator: 10 min. Fixture Speed With Activator: 5 min. Viscosity: 500 cps Gap fill: 0.25mm Flash Point: >100°C Shelf Life: minimum 12 month Specific Gravity: 1.06. Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours. Cure Time with good % of final strength: 2 hours Typical Breakaway Strength din: 40 Nm (25/55) Typical Prevailing Strength din : 55 Nm (45/70) Typical Breakaway ISO 10964: 26 Nm (16/36) Typical Prevailing ISO 10964: 36 Nm (22/50) For further enquiries please contact us.  Our details can be found in the ‘Business Seller Information’ below. Discounted rates are available on items bought in larger quantities. Thank
Model: B270 Sizes: 10ml & 50ml By the leading brand Bondloc Specifications: Resin: Dimethacrylate Colour: Green Fixture Speed No Activator: 10 min. Fixture Speed With Activator: 5 min. Viscosity: 500 cps Gap fill: 0.25mm Flash Point: >100°C Shelf Life: minimum 12 month Specific Gravity: 1.06. Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours. Cure Time with good % of final strength: 2 hours Typical Breakaway Strength din: 40 Nm (25/55) Typical Prevailing Strength din : 55 Nm (45/70) Typical Breakaway ISO 10964: 26 Nm (16/36) Typical Prevailing ISO 10964: 36 Nm (22/50) For further enquiries please contact us.  Our details can be found in the ‘Business Seller Information’ below. Discounted rates are available on items bought in larger quantities. Thank
Model: B270 Sizes: 10ml & 50ml By the leading brand Bondloc Specifications: Resin: Dimethacrylate Colour: Green Fixture Speed No Activator: 10 min. Fixture Speed With Activator: 5 min. Viscosity: 500 cps Gap fill: 0.25mm Flash Point: >100°C Shelf Life: minimum 12 month Specific Gravity: 1.06. Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours. Cure Time with good % of final strength: 2 hours Typical Breakaway Strength din: 40 Nm (25/55) Typical Prevailing Strength din : 55 Nm (45/70) Typical Breakaway ISO 10964: 26 Nm (16/36) Typical Prevailing ISO 10964: 36 Nm (22/50) For further enquiries please contact us.  Our details can be found in the ‘Business Seller Information’ below. Discounted rates are available on items bought in larger quantities. Thank